Search
Now showing items 1-8 of 8
Stress–Strain Analysis of a Pipeline With Inner and Outer Corrosion Defects
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A numerical simulation method is adopted to analyze the effects of three types of defect geometries ((1) a single defect on the inner surface, (2) a single defect on the outer surface, and (3) double coaxial defects on the ...
Comparative Study of Typical Electromagnetic Heating Methods in Welded Pipe: Induction Heating Versus Contact Heating
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Typical electromagnetic heating techniques include induction heating (IH) and contact heating (CH). The study of these techniques in welding has always been a controversial topic owing to the lack of straightforward ...
Finite Element Limit Analysis of the Bearing Capacity of Strip Footing on a Rock Mass with Voids
Publisher: American Society of Civil Engineers
Abstract: Finite element limit analysis (FELA) was used to investigate the bearing capacity of strip footing on a rock mass with single or multiple continuous voids. The underlying rock mass was assumed to have perfect plasticity ...
Numerical Analysis of Temperature Fields and Thermal Stress Fields in Heating Process of Large-Diameter Seamless Steel Pipe Blanks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the piercing process of large-diameter seamless steel pipe blanks after heating, severe lateral cracks easily occur on the surface of pierced pipe blanks owing to the effects of the large temperature difference and ...
Development of a Thermal Hydraulic Analysis Code and Transient Analysis for a Fluoride Salt Cooled High Temperature Test Reactor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fluoridesaltcooled hightemperature reactor (FHR) is an advanced reactor concept that uses hightemperature tristructural isotropic (TRISO) fuel with a lowpressure liquid salt coolant. Design of the fluoridesaltcooled ...
Laminar Combustion Characteristics of Premixed Shale Gas and Air Flames
Publisher: ASCE
Abstract: The laminar combustion characteristics of premixed shale gas/air flames were studied by spherical expansion flame experiments and chemical kinetics simulations. The influence of the initial temperature, the initial pressure, ...
Numerical Simulation and Experimental Study on Hydraulic Bursting Failure of Aluminum Alloy T-Shaped Tube in Hydroforming
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this work, the hydraulic bursting method was used to investigate the bursting failure of aluminum alloy as-formed T-shaped tube by hydroforming, which consisted of the rupture region and bursting pressure. The bursting ...
Percentile-Based Relationship between Daily Precipitation and Surface Air Temperature over the Qinghai–Tibet Plateau
Publisher: American Meteorological Society